Gaggia Milano La Giusta, Руководство по эксплуатации и обслуживанию

Страница: 16 / 41

English
18
55
Before proceeding with installation check that:
5
• there are no bumps, signs of knocks or deformities
5
•
there are no damp patches or marks which could
lead one to assume that the packaging has been
exposed to the elements
5
•
there are no signs of tampering
55
Once one is satisfied that transportation has been
correctly effected, proceed with installation.
55
Make sure the appliance is
installed on a flat surface
capable
of bearing its
weight (see "Technical
specifications" chapter)
and take care of leaving a
clear area of at least 30
cm around the machine.
5
The least height of the
support's top must be 110
cm (the highest surface of
the
appliance shall
however be at least 1.5 m
from the ground level).
5
the gradient of the
supporting surface should
NOT exceed 2°;
5
Proceed with installation following the instructions
according to the sequence as described below.
55
5.1 Water connection
5
Before connecting the
appliance to the water
network, please read and
follow
the applicable
regulations in force in your
country.
55
Water hardness should not
be lower than 8°F.
55
The machine should be
supplied
with water
treated with a descaling
device, particularly in case
of water with high content
of calcium and magnesium
salts (hard water).
5
Make sure the water
network provides drinking
water,
with pressure
ranging between 0.15
MPA and 0.8 MPA (1.5
and 8 bars).
5
Connect purifier (C) to the water mains (A).
55