Gaggia Milano La Giusta, Руководство по эксплуатации и обслуживанию, Страница: 18 / 41

English
20
5
Connect the power cable (E) to the electric line using a
plug, or in the case of fixed installation, using a
multi-polar switch (D) for mains separation, with a
contact distance of at least 3 mm.
55
Please refer to the technical manual for voltage change.
55
The yellow-green coloured
cable MUST be connected
to the room's earthing
system.
55
Depending on the
regulations in force in the
Country where the machine
is being used, the cable
connecting to the power
supply has to be pre-set or
equipped with an all-pole
switch (with a minimum
contact opening of 3 mm),
or with a plug complying
with the same regulations.
55
It is recommended to
install a residual current
device (RCD) with a rated
residual
current not
exceeding 30 mA.
55
If the power cord is
damaged,
it must be
replaced by the
manufacturer, its service
centre or by adequately
qualified
personnel in
order to avoid any risks.
55