16
English
Installing the water filter
Remove the small white filter from the water tank and store it in a dry place.
Immerse the water filter vertically (with the opening pointing up) in cold
water and gently press its sides to let any air bubbles out.
Place the filter in the water tank, ensuring it is correctly in place. Refill
the water tank and place it in its compartment.
Press the
CLEAN/SETTING
clean/setting
button, select " SETTINGS ", and then " WATER
HARDNESS " from the settings menu.
Follow the instructions shown on the display to activate the filter.
Note
: you can pause the filter activation procedure by pressing the
START/STOP
START/STOP
button. To resume the procedure, press the
START/STOP
START/STOP
button again.
Remove the water filter from the water. Set the machine according to
the detected water hardness (see the "Measuring water hardness" chapter) and the
letters found on the filter base:
A
= soft water – 1 or 2 small squares
B
= hard water (standard) – 3 small squares
C
= very hard water – 4 small squares
Replacing the water filter
When the water filter runs out, the display will show an alarm message.
1
Replace or deactivate by pressing the
CLEAN/SETTING
clean/setting
button, and then
the " SETTINGS " button.
2
Select the " WATER FILTER " button.
3
Select " REPLACE " to change the filter or " DISABLE " if you do not intend to
use the filter. Confirm with the "
" button.
Follow the instructions shown on the display to activate the filter correctly.
START/STOP
ON/OFF
my favourites
HOME
clean/setting
WATER FILTER
REPLACE
ACTIVATE
DISABLE
START/STOP
ON/OFF
my favourites
HOME
clean/setting
Filter expired, replace
or disable it
4219-450-08051 MANUAL GAG. CAD. MILK EN-FR 120US Rev 01.indd 16
09/10/2020 16:22:44