Gaggenau WT260165, Руководство пользователя и инструкции по установке, Страница: 40 / 56

en
Basic settings
40
visit the service/support section of
your local website: www.home-con-
nect.com.
16.10 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡
Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡
Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡
The current software and hardware
version of your appliance.
¡
Status of any previous reset to
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note:
Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
Basic settings
17 Basic settings
Basic settings
You can configure the basic settings
for your appliance to meet your
needs.
Note:
You can also adjust the the ba-
sic settings in the Home Connect
app.
17.1 Overview of the basic
settings
Note:
Additional functions may be
available as a result of software up-
dates.
→
"Installing the software update",
Page 38
If a software update is available, you
can find further information in the
Home Connect app.
1
2
3
4
5
6
7
Programme selector with programme
positions
1
Set the volume of the signal
at the end of the programme:
0 (off) to 4 (very loud)
2
Set the volume of the signal
tone emitted when the but-
tons are pressed:
0 (off) to 4 (very loud)
3
Set the display brightness:
1 (low) to 4 (very high)
4
Adjust the dryness level
→
Page 33 :
0 (dry) to 3 (driest)
5
Start the basic (CP1) or in-
tensive (CP2) appliance care
programme.
→
"Appliance care", Page 41
6
Display the number of started
programmes (PC).
7
Restore the appliance to the
factory settings (rES).