Gaggenau WT260165, Руководство пользователя и инструкции по установке, Страница: 42 / 56

en
Appliance care
42
18.3 Running the basic appli-
ance care programme
To remove light dirt deposits in the
appliance, you can run the basic ap-
pliance care programme.
Notes
¡
The basic appliance care pro-
gramme runs for approximately
1 hour.
¡
After a lengthy period of use, the
appliance reminds you to run the
basic appliance care programme.
Before the programme starts or
after the programme has ended,
the display shows the notification
"CArE" . This notification appears
repeatedly until you have run the
basic appliance care programme
through to the end.
Requirements
¡
The appliance care programme is
ready. →
Page 41
¡
The appliance care programme is
called up. →
Page 41
1.
Pour approx. 1.5 litres of hot
mains water into the condensation
container.
Hold the filled condensation con-
tainer level so that no liquid spills
out.
2.
Insert the condensation container
so that it locks into place.
3.
Press .
a
The appliance care programme
starts and a signal tone sounds.
a "End" appears on the display and
a signal tone sounds once the ap-
pliance care programme has
ended.
4.
Pull out the condensation con-
tainer horizontally and empty it.
5.
If you drain the condensation using
the drain hose, remove the stopper
from the underside of the condens-
ation container and insert it into
the recess in the top of the con-
densation container. →
Page 41
6.
Insert the condensation container
so that it locks into place.
7.
Put the appliance into standby
mode. →
Page 30
18.4 Running the intensive
appliance care pro-
gramme
You can run the intensive appliance
care programme to remove any stub-
born dirt deposits in the appliance
and odours after a downtime of more
than one month.
Notes
¡
The intensive appliance care pro-
gramme runs for approximately 4
hours and must not be cancelled.
¡
When you run the intensive appli-
ance care programme, you need
the original appliance care product
→
Page 28 .
Starting the intensive appliance
care programme
Requirements
¡
The appliance care programme is
ready. →
Page 41
¡
The appliance care programme is
called up. →
Page 41
1.
Press .
a
"CP2" and the programme dura-
tion alternate on the display.
2.
Pour a bottle of the appliance care
product and approx. 1.5 litres of
hot mains water into the condensa-
tion container.
Hold the filled condensation con-
tainer level so that no liquid spills
out.
3.
Insert the condensation container
so that it locks into place.
4.
Press .