Gaggenau WT260165, Руководство пользователя и инструкции по установке, Страница: 41 / 56

Appliance care
en
41
17.2 Changing the basic set-
tings
1.
To call up the basic settings, press
.
2.
Use the programme selector to se-
lect the required basic setting.
→
Page 40
3.
Adjust the basic setting:
‒
To change the value, press
or
.
‒
To reset the appliance to the
factory settings, press and hold
for approx. 3 seconds.
4.
To exit the basic settings, press .
Appliance care
18 Appliance care
Appliance care
The appliance offers cleaning pro-
grammes for basic and intensive ap-
pliance care.
18.1 Preparing for appliance
care
Preparing the appliance for the
appliance care programme
Prepare the appliance before running
the appliance care programme.
Requirements
¡
The drum is empty.
¡
The appliance is in standby mode.
1.
Clean the fluff filter → Page 30 .
2.
Pull out the condensation con-
tainer horizontally and empty it.
→
Page 32
Preparing the condensation
container for the appliance care
programme
If you drain the condensation from
the appliance using the drain hose,
prepare the condensation container
before running the appliance care
programme.
1.
Remove the stopper from the re-
cess in the top and insert it in
the underside ⁠.
2.
Clean the filter in the condensation
container.
18.2 Calling up the appliance
care programme
Requirement:
The appliance care
programme is ready. → Page 41
1.
Press .
The switch-on process takes a few
seconds.
2.
Press .
3.
Set the programme to position 5.
a
"CP1" and the programme dura-
tion alternate on the display.