Gaggenau WT260165, Руководство пользователя и инструкции по установке, Страница: 38 / 56

en
Home Connect
38
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tip:
Please also follow the instruc-
tions in the Home Connect app.
Notes
¡
Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→
"Safety", Page 4
¡
Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
16.1 Setting up the
Home Connect app
1.
Install the Home Connect app on
your mobile device.
2.
Start the Home Connect app and
set up access for Home Connect.
The Home Connect app guides
you through the entire login pro-
cess.
16.2 Setting up Home Con-
nect
Requirements
¡
The Home Connect app has been
installed on your mobile device.
¡
The appliance is receiving signals
from the WLAN home network (Wi-
Fi) at its installation location.
1.
Press and hold for approx.
3 seconds.
2.
Follow the instructions in the
Home Connect app.
16.3 Activating Wi-Fi on the
appliance
1.
Press and hold for approx.
3 seconds.
2.
Press repeatedly until the dis-
play shows "oFF".
3.
Press to activate the Wi-Fi.
a
The display shows "on".
Notes
¡
If the Wi-Fi is activated, the display
alternately shows "on" and the sig-
nal strength of the Wi-Fi connec-
tion.
¡
To exit the Home Connect settings,
press and hold for approx. 3
seconds.
16.4 Deactivating Wi-Fi on the
appliance
1.
Press and hold for approx.
3 seconds.
2.
Press repeatedly until the dis-
play shows "on".
3.
Press to deactivate the Wi-Fi.
a
The display shows "oFF".
Note:
To exit the Home Connect set-
tings, press and hold for approx. 3
seconds.
16.5 Installing the software
update
Note:
If a software update is avail-
able, a message appears in the
Home Connect app.
▶
To install the software update, fol-
low the instructions in the
Home Connect app.
a
The control panel is partially
locked during the installation.