Gaggenau VI414105, Руководство пользователя и инструкции по установке

Страница: 9 / 40

Familiarising yourself with your appliance
en
9
​⁠ Activating the PowerBoost function
​⁠ Activating the wok function
Indicators on the illuminated rings
Each control knob is encircled by an illuminated ring
with various display functions.
The illuminated ring on the control knob has an visual
indicator for each function. The illuminated ring
changes colour when you activate particular functions
or processes.
The illuminated ring on the control knob lights up or-
ange during operation. You can choose between two
colour shades. If you have several appliances installed
next to each other, you can change the shades in the
settings for the appliances so that all of the illuminated
rings light up in the same shade.
→
"Changing the colour of the illuminated ring",
Page 12
Indicator Name
Off Appliance OFF
Lights up: Orange Appliance ON
Flashing: Orange Appliance OFF
Residual heat indicator
Light up: Blue Home Connect
Flash: Blue Home Connect, appliance
is connected to the home
network
Flashing alternately: Or-
ange and white Safety switch-off function,
power failure
Flashing alternately: Yel-
low and magenta Appliance fault.
Call customer service.
Lights up: Green for a few
seconds, then turns yel-
low The appliance is initial-
ising during initial connec-
tion or following a power
failure
6.3 Distribution of the cooking zones
The specified power has been measured with the standard pots which are described in IEC/EN 60335-2-6. The
power may vary depending on the size of the cookware or cookware material.
A
Area Highest power level
​⁠ 21 cm diameter ​⁠ Power level ​⁠ ​⁠
Booster for pots 2,200 W
3,700 W
​⁠ 26 cm diameter ​⁠ Power level ​⁠ ​⁠
Booster for pots 2,600 W
3,700 W
​⁠ 32 cm diameter ​⁠ Power level ​⁠ ​⁠
Booster for pots 3,300 W
3,700 W
6.4 Cooking zone
Before you start cooking, check whether the size of the
cookware fits the cooking zone that you want to use for
cooking.
Area Cooking zone type
​⁠ Single-circuit cooking zone
​⁠ Tri-circuit cooking zone
The cooking zone switches on automatic-
ally when you use cookware with a base
that matches the outer cooking zone that
you want to use.
6.5 Residual heat indicator
The hob has a residual heat indicator for each cooking
zone. The residual heat indicator indicates that a cook-
ing zone is still hot. Do not touch the cooking zone
while the residual heat indicator is still lit or immediately
after the residual heat indicator goes out.
Depending on the amount of residual heat, the display
shows the following symbols:
¡
​⁠: High temperature
¡
​⁠: Low temperature
The illuminated ring on the control knob flashes or-
anges.