Gaggenau VI414105, Руководство пользователя и инструкции по установке

Страница: 35 / 40

Installation instructions
en
35
3.
Remove the protective film from the rear of the illu-
minated ring.
4.
Push the control knob into the hole.
‒
Always position the side marking on the control
knob on the left.
5. Ensure that the retaining lug on the retaining plate is
located on the upper side and the control knob is in
the zero setting.
6.
On the rear of the control knob, tighten the retaining
nut using the installation tool provided.
7.
Align the control knob precisely in the zero setting.
25.12 Connecting the control knob to the
connection cables
1.
Connect the control knob to the enclosed connec-
tion cable.
The two connectors on the control knob are
identical.
2. Ensure that the plug engages in the socket.
3.
After installation, check that all of the plug connec-
tions are seated correctly.
4.
To secure all connection cables after installation,
bend the lugs on the retaining plate.
25.13 Connecting connection cables to the
appliance
ATTENTION!
Heat may damage the appliance's connection cables.
▶
Ensure that the connection cables do not touch any
hot parts of the hob or oven.
▶
Install an intermediate floor so that the connection
cables are no longer accessible after the hob has
been installed.
1.
Connect the connection cable for the control knob
to the appliance's socket.
2.
Ensure that the plug engages in the socket.
25.14 Installing the appliance
WARNING ‒ Risk of electric shock!
If the insulation of the power cord is damaged, this is
dangerous.
▶
Never let the power cord come into contact with hot
appliance parts or heat sources.
▶
Never let the power cord come into contact with
sharp points or edges.
▶
Never kink, crush or modify the power cord.