5
Insta
ll
at
i
on notes
Insta
ll
at
i
on
l
ocat
i
on
The ideal installation location is a dry, well ventilated
room.
The installation location should not be exposed to direct
sunlight or be near a source of heat, such as a cooker or
heater. If installation near a source of heat is
unavoidable, a suitable insulating plate must be fitted or
the following minimum distances from the heat source
must be observed:
−
30 mm from electric cookers,
−
300 mm from oil or coalfired cookers.
C
li
mate c
l
asses
The climate class is specified on the rating plate. It
indicates the room temperature range in which the
appliance can be operated.
C
li
mate c
l
ass
pe
r
m
i
ss
i
b
l
e
r
oom
tempe
r
atu
r
e
SN
+10
°
C to 32
°
C
N
+16
°
C to 32
°
C
ST
+16
°
C to 38
°
C
T
+16
°
C to 43
°
C
Insta
ll
at
i
on n
i
che
For troublefree installation of the appliance and a
harmonious appearance of the kitchen front, it is
important that the specified dimensions of the
installation niche be observed.
In particular, it should be ensured that the niche is
square. The side walls must be free of ledges,
projections and other uneven profiles.
The squareness of the installation niche can be
determined using appropriate tools, e.g. a spirit level.
The side walls and the ceiling of the installation niche
must be at least 16 mm thick.
All overhead units to which the top of the appliance
should be secured must be firmly connected to the floor
surface or the wall.
F
l
oo
r
su
r
face
To be able to install the appliance safely and ensure that
it will function correctly, the floor surface must be
horizontal and flat. The installation area must be at the
same level as the rest of the room. The floor surface
must be strong enough to support the heavy load of the
appliance and be made of a hard, inflexible material. In
case of doubt, consult an architect or qualified builder.
We
i
ghts
App
li
ance
We
i
ght
Packaged
app
li
ance on the
wooden pa
l
ette
Builtin appliance
175 kg
180 kg
Freestanding
appliance
240 kg
255 kg
T
r
anspo
r
t
i
ng the app
li
ance
!
Wa
r
n
i
ng!
The appliance is very heavy. Transport the appliance
with great care, otherwise persons could be injured
or the appliance could be damaged.
Transport the appliance using a transport tool
appropriate to the installation location and appliance (lift
truck or dolly).
Transport the packaged appliance on the wooden
palette as near as possible to the installation location.
Secure the appliance against tipping over during
transport.
If the building prevents the appliance from being
transported vertically, it is possible to transport it
horizontally instead. To install the appliance, the room
must be at least 221cm high. Following installation,
there must be a minimum waiting period of ½ hour
before the master switch is switched on.
Castors are provided solely to help assembly. The
appliance may be moved a maximum of 4 m on the
castors.
The appliance must not be moved along uneven or soft
floors on its castors.
It is not permitted to transport the unpacked appliance
unless the antitip stabiliser has been fitted and the
appliance has been completely cleared out.