21
11.
Attach the furniture door to the levelling screws by
the fixing rail.
12.
Screw the nuts onto the levelling screws.
Do not tighten the nuts fully.
13.
Using the levelling screws, adjust the furniture door
vertically and laterally for correct alignment.
14.
Tighten the nuts. This secures the lateral alignment
of the furniture door.
15.
Fit the angle bracket between the furniture door and
appliance door from underneath.
16.
Secure the angle bracket to the existing holes in the
appliance door using one screw for each hole.
17.
Align the furniture door.
18.
Drill pilot holes in the furniture door (drill diameter
2mm).
Do not drill too deep.
19.
Secure the angle bracket to the furniture door.
20.
Slot the door cover onto the angle bracket.
21.
Slot the four screws provided (4 x 45) into the holes
in the appliance door with a washer on each.
The screws are designed for kitchen unit doors with
a minimum thickness of 18mm.
Use shorter screws for thinner kitchen unit doors.
Shorter screws are not included in the scope of
delivery.
22.
Tighten the screws.
23.
Slot the door cover onto the fixing rail from above.
Note
The appliance cannot operate without the door covers.
The appliance uses the door covers to detect whether
the appliance doors are closed.