13
F
i
tt
i
ng the app
li
ance
1.
P
r
e
i
nsta
ll
at
i
on checks
To ensure safe and troublefree installation and an
optimum overall appearance of the kitchen front, the
following points must be checked beforehand:
D
Floor surface of the installation niche
D
Dimensions of the installation niche
D
Squareness of the installation niche
D
Clearance from the installation niche to adjacent
kitchen units and wall
D
Location of the socket
D
Location of the freshwater and outlet connections
D
Stability and security of adjacent cabinet parts
All cabinet parts onto which the appliance is
screwed must be firmly connected to the wall.
2.
R
emov
i
ng the packag
i
ng,
t
r
anspo
r
t
l
ocks and wooden
pa
l
ette
!
Wa
r
n
i
ng!
The appliance is very heavy and may tip over while
being unpacked.
To prevent the appliance from tipping over, do not
open the appliance doors until the antitip stabiliser
has been fitted.
Proceed with great care, otherwise persons could
be injured or the appliance could be damaged.
To protect the floor surface from damage during
installation:
D
Lay a strip of linoleum or similar on the floor to the
front of the planned area of installation and fix down
with adhesive tape.
Note!
Transport accessories must be positioned against
the centre of the back or sides of the appliance.
Never slide the transport accessory underneath the
appliance from the front.
Risk of appliance damage.
D
Move the appliance using a dolly or lift truck.
R
emov
i
ng the t
r
anspo
r
t packag
i
ng
1.
Remove the bands from around the carton.
2.
Cut the carton open along the printed cutting line
and remove it. Use the knife carefully to avoid
damaging the surfaces of the appliance.
3.
Check the appliance for damage.