4
Safety and wa
r
n
i
ng notes
Please ensure that you have read these assembly
instructions thoroughly and completely before you
commence installation and commissioning of the
appliance.
Compliance with all the notes and instructions in this
guide is the prerequisite for the safe installation and
commissioning of the appliance.
These appliances are very heavy and must be secured
against tipping over during transport, installation and
operation. The use of an antitip stabiliser is mandatory.
Keep appliance doors closed until the appliance has
been both fully assembled and secured in accordance
with the instructions in this guide.
Due to the weight and dimensions of the appliance and
to minimise the risk of injury and appliance damage, the
installation of the appliance must be carried by at least
two persons.
The installation and assembly of this appliance require
comprehensive knowledge of various areas of handicraft
(mechanics, joinery, plumbing, electrics).
The person installing the appliance is responsible for
guaranteeing its safe installation and commissioning.
Errors in installation and the damage resulting therefrom
are not covered by the manufacturer’s warranty. You will
find the warranty terms and conditions in the documents
supplied with the appliance.
Unplug the mains plug or remove the fuse before any
work is carried out on the appliance.
Power cords must only be replaced by a qualified
electrician.
Appliance repairs, due to their highly complex nature,
should only be carried out by our aftersales service.
In addition to national legal rules and regulations, the
connection requirements of the local power and water
utilities must also be observed.
A fully laden appliance is very heavy. If positioned on an
unsuitable floor surface, the appliance could tip over and
cause serious injuries and damage. The floor surface
must be strong enough to support the load of the
appliance and be made of a hard, inflexible material.
Keep these assembly instructions in a safe place for
future reference.
Always clear the appliance out completely before
removal and transport.