Gaggenau RW 414, Инструкция по использованию и уходу

Страница: 9 / 72

9
Installing and connecting the appliance
After installing the appliance, wait at least before switching
on the appliance. During transit the oil in the refrigeration
system may have moved.
Before switching on the appliance for the first time, clean
the inside of the appliance.
Apart from statutory national regulations, you should adhere
to the connection terms applied by local electricity and water
companies.
Do not remove the transportation protection devices from
the shelves and storage compartments until the appliance
has been installed.
Connection to the power supply
The appliance comes with an UL listed, 3-wire power supply
cord.
The appliance requires a 3-wire receptacle.
The receptacle must be installed by a licensed electrician
only.
The receptacle must be fitted with a 10 to 16 A fuse.
Please observe in this coherence the following table:
Switching on the appliance

Press the POWER button
O
.
When the appliance has been switched on, the appliance
begins to cool down. When the door is open, the interior
lights come on.
To change the preset temperatures
–> see “Setting the temperature”.
Switching off and disconnecting
the appliance
Switching off the appliance

Press the POWER button
O
.
Disconnecting the appliance
If you do not use the appliance for a prolonged period:

Switch off the appliance.

Take all perishable food out of the appliance.

Pull out the mains plug or switch off the fuse.

Clean the appliance interior (see "Cleaning the
appliance").

To prevent odors, leave the doors open.
m
CAUTION
m
Have the appliance installed by an electrician according
to the enclosed installation instructions.
m
WARNING
m
Avoid electrical shock hazard!
– Plug into a grounded 3 prong outlet.
– Do not remove ground prong.
– Do not use an adapter.
– Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Improper connection of the equipment grounding
conductor may result in electric shock. Have the
appliance checked by a qualified electrician or service
technician if you are in doubt as to whether the
appliance has been properly grounded.
Appliance Maximal load at one time
Wine unit 18” 2 Ampere
Wine unit 24” 2 Ampere
NOTE
The preset temperatures (factory settings) are reached
after several hours. Do not put any food in the appliance
beforehand.