Gaggenau EB 388 610, Инструкция по использованию и уходу

Страница: 11 / 24

11
Before first use
Here you find out what you have to do before
preparing meals with your appliance for the first time.
Read the section entitled Important safety notes
beforehand.
Setting the time
When you connect a new appliance or after a
prolonged power failure, the time
‹‰
:
‹‹
appears in
the time display.
Proceed as follows to set the time:
1 Press the
M
key four times. The
M
symbol
flashes in the display.
2 Set the time with the
@
and
A
keys.
3 Press the
~
key. The time display lights up in the
display.
You can also set the time later. Proceed in the same
way to do this.
Note: When the oven is switched off, the time display
is hidden to ensure compliance with the EU regulation
on electricity consumption in the standby mode.
Refer to the section entitled "Basic settings" to find
out how to permanently display the time anyway.
Heating up the oven
Make sure there are no packaging remainders left in
the interior.
Heat up the empty, closed oven to dispel the 'new'
smell. An hour of hot air at 390° F (200°C) is ideal.
Then allow the oven to cool down and wipe the
surfaces with a moist cloth.
Cleaning accessories
Before using accessories for the first time, thoroughly
clean them with hot soapy water and a soft dish cloth.
Note: Do not clean the baking stone with water and
detergent. Cracks can appear in the material if a moist
baking stone is heated up. If the baking stone should
ever become moist, it must dry out completely before
the next time it is heated up. This can take several
days.
Operating the appliance
Turning on
1 Set the temperature selector to the required
value. The temperature and the mode are
displayed.
2 Set the required mode with the mode selector.
The warming up symbol
[
appears in the display until
the set temperature has been reached. It appears
again during post-heating.
Displaying the current temperature:
You can query the current temperature in the cooking
interior at any time. To do this, press the
~
key. The
current temperature is shown briefly in the bottom
part of the display.
Note: During continuous operation of the oven,
system-related temperature fluctuations of up to 40° F
(5 °C) above or below the set temperature are within
the normal range.
Turning off
To switch off the oven, set the temperature selector to
0. The oven lighting goes off and the oven is in the
standby mode.
Note: The time display goes off in the standby mode.
Press any key to show the time again. Refer to the
section entitled "Basic settings" to find out how to
permanently display the time.