Gaggenau CI 282 602, Руководство пользователя

Страница: 31 / 48

Operation
en-us
31
Activating the display cleaning protection
With this function, you can clean the control panel while
the cooktop is switched on, without accidentally changing
any settings.
▶
Remove the twist knob from the cooktop.
a
A signal sounds.
a
and the cooktop settings are blinking.
a
The heating process is interrupted.
a
If a timer is running, it will be paused.
a
The control panel is locked for 10 minutes.
Note: If you do not place the twist knob back on after
10 minutes, the cooktop switches itself off and the panel
lock is activated.
Deactivating the display cleaning protection
▶
Put the twist knob back onto the twist pad within 10 min-
utes.
a
The control panel is unlocked. Operation is resumed.
7.15 Basic settings
You can configure your appliance to meet your needs.
Basic settings overview
Here you can find an overview of the basic settings and
the preset factory settings.
Display Function
Signal tones
- All signals are switched on.
1
- Most of the signals are switched off.
Time for setting a cooking zone after selec-
tion
- The cooking zone remains selected for
5 seconds.
- The cooking zone remains selected for
10 seconds. 1
- The cooking zone remains selected for
15 seconds.
- Unlimited: The last selected cooking
zone remains selected. You can adjust the
settings without having to select it again.
Power management function. Limiting the to-
tal power of the cooktop. The available set-
tings depend on the maximum power of the
cooktop.
– Deactivated 1 , 2
– 1.000 W minimum power
⁠. – 1.500 W
...
– 3.000 W recommended for 13 A
⁠. – 3.500 W recommended for 16 A
– 4.000 W
⁠. – 4.500 W recommended for 20 A
...
or ⁠. – Maximum power of the cooktop
2
Restore factory settings
- Keep personal settings.
1
- Restore factory settings.
1 Factory setting (may vary according to model)
2 The cooktop's maximum power output is shown on the
rating plate
Display Function
Cooking sensor
Connect the wireless cooking sensor to the
cooktop.
Set according to height above sea level:
¡
- : Decrease
: Default setting 1
- : Increase
Results for suitability test for cookware
– Not suitable.
– Not ideal.
–Suitable.
Home Connect™
→
"Home Connect™ ",
Page 32
1 Factory setting (may vary according to model)
2 The cooktop's maximum power output is shown on the
rating plate
Changing the basic settings
Requirement: The cooktop is turned off.
1.
Turn on the cooktop.
2.
Within the next 10 seconds, press ⁠.
The first four displays provide the product information.
To call up the individual displays, turn the twist knob.
Product information Display
Customer Support index (CI)
Production number
Production number 1
⁠ ⁠.
Production number 2 ⁠.
3.
Press again to access the basic settings.
4.
Press repeatedly until the required basic setting is
displayed.