Gaggenau CI 282 602, Руководство пользователя

Страница: 16 / 48

en-us
Operation
16
1.
Press ⁠.
a
lights up in the Short-term timer display.
2.
Set the desired time using the twist knob.
3.
Press to confirm.
a
The time starts to count down.
a
When the time has elapsed, a beep sounds. blinks in
the timer display.
4.
Press to turn off the signals.
Changing or canceling the Short-term timer
1.
Press ⁠.
2.
Set the desired time using the twist knob.
To cancel the short-term timer, set the time to ⁠ ⁠.
3.
Press to confirm.
Using the timer plus function
With the timer plus function you can determine how much
time has elapsed since the Short-term timer has elapsed.
Requirement: The Short-term timer has run out and the
timer end signal is still active.
1.
Press and hold for a few seconds.
a
The Stopwatch is activated and is displayed on the
Stopwatch display.
a
The originally set Short-term timer value blinks on the
Short-term timer display.
2.
Press and hold for a few seconds.
a
Both timers are cleared.
7.7 Stopwatch
The Stopwatch displays the time that has elapsed since
activating the function.
The Stopwatch works independently from the cooking
zones and from other settings. This function does not au-
tomatically switch off a cooking zone.
Starting the Stopwatch
WARNING
Boilovers can cause smoke and some foods and oils may
catch fire if left on high temperature settings.
▶
When using a timer, always supervise the cooktop.
▶
Do not allow anything to boil over or burn.
▶
Press ⁠.
a
⁠ ⁠. lights up on the stopwatch display.
a
The time begins to count up.
Note: The maximum duration is 99 minutes and 59 sec-
onds (99.59). If this value is reached, the display starts
again at 00.00.
Canceling the Short-term timer
1.
Press ⁠.
a
The timer is paused, the display remains on.
2.
If you press while it still lights up orange, the timer
continues to count up.
3.
Press and hold to cancel the short-term timer.
7.8 Booster function for pots
With this function you can heat larger quantities of water
faster than with power level 9. This function temporarily in-
creases the top output of the selected cooking zone.
You can also use this function on the flexible cooking zone
if it is used as a joined cooking zone.
Restrictions for using the Booster function
¡
This function can only be used on one cooking zone of
the same cooktop segment at a time. The illustration
shows these segments of your cooktop.
¡
If the function is not available, and blink on the dis-
play of the selected cooking zone. The power level is
set automatically.
Activating the booster function for pots
1.
Select the cooking zone with the twist knob.
2.
Press ⁠.
a
lights up in the cooking zone display.
Deactivating the booster function for pots
1.
Select the cooking zone with the twist knob.
2.
Press ⁠.
a
goes out.
a
The cooking zone switches to power level ⁠.
Notes
¡
In certain circumstances, this function may switch off
automatically in order to protect the electronic elements
inside the cooktop.
¡
If you have set a power level before activating the func-
tion, this power level is used automatically after the
function has been deactivated.
7.9 Booster function for pans
With this function you can heat cookware faster than with
power level ⁠.
You can also use this function on the flexible cooking zone
if it is used as a joined cooking zone.
Recommendations for using this function:
¡
Always use cookware that has not been pre-heated.
¡
Use cookware with a flat base.
¡
Do not use cookware with a thin base.
¡
Never leave empty cookware, oil, butter or lard to heat
up unattended.
¡
Do not place a lid on the cookware.
¡
Place the cookware on the center of the cooking zone.
¡
Ensure that the diameter of the base of the cookware
matches the size of the cooking zone.
¡
Refer to the information on cooking with induction for in-
formation on the type, size and positioning of the cook-
ware.
→
Page 9