22
en
Childproof lock
A
Childproof lock
Childproof lock
The appliance has a childproof lock to prevent children
operating it accidentally.
Notes
–
To use the childproof lock, you will need to set it to
"available" in the basic settings.
–
If there is a power cut after the childproof lock has
been activated, the childproof lock may be
deactivated when the power comes back on.
Activate the child lock
Prerequisite:
The function selector is set to
0
.
Touch and hold the
0
symbol for at least 6 seconds.
The child lock is activated. The standby screen appears.
The
0
symbol is shown at the top of the display.
Deactivating the child lock
Prerequisite:
The function selector is set to
0
.
Touch and hold the
1
symbol for at least 6 seconds.
The child lock is deactivated. You can set the appliance
as usual.
n
Automatic programmes
Automatic programmes
You can prepare a wide range of food using the
automatic programmes. The appliance will choose the
optimal setting for you.
To achieve good results, the cooking compartment must
not be too hot for the type of food you have selected. If
it is, a message will appear on the display. Allow the
appliance to cool and then try again.
Information on the settings
▯
The cooking result depends on the quality of the
food and the size and type of cookware. For an
optimal cooking result, only use food that is in good
condition and meat that is chilled to refrigerator
temperature. For frozen food, only use food straight
out of the freezer.
▯
The automatic programme suggests a temperature,
type of heating and cooking time.
▯
For some dishes, you will be required to enter the
weight. It is not possible to set weights outside the
preprogrammed weight range.
▯
For some dishes, you will be asked to enter desired
level of browning, the thickness of the food and/or
the cooking level of the meat or vegetables.
▯
For some dishes, the cooking compartment is
preheated empty. Place the food in the cooking
compartment once the preheating is complete and
a message appears in the display.
▯
Your preferred settings will be shown next time as a
suggestion.
Core temperature probe
For some recipes, you will need the core temperature
probe. Use the core temperature probe for these
recipes.
~
"Core temperature probe" on page 26
23
Automatic programmes
en
Selecting a dish
The following categories are available. One or more
dishes are listed beside each category.
Note:
The last selected category is displayed in the first
position.
Categories:
▯
Meat and poultry
▯
Fish
▯
Vegetables
▯
Side and oven dishes
▯
Dessert
▯
Bread and pastries
▯
Raising dough
▯
Regenerating
▯
Defrosting
Applying settings for a dish
You are guided through the entire setting process.
Follow the instructions in the display.
Use the rotary selector to scroll through the individual
levels.
1
Set the function selector to
ž
.
2
Touch the
i
symbol. Press
™
to confirm.
3
Use the rotary selector to select the category and
press
™
to confirm.
4
Use the rotary selector to select the required dish
and press
™
to confirm.
The possible settings appear in the display. For
many dishes, you can change the settings to suit
your needs.
For some dishes, you must set the weight.
Tip:
By pressing the
*
symbol, you can receive
information about accessories and preparation
methods.
5
Press
™
to confirm the required settings. Follow
the directions in the display.
Once the cooking time has elapsed, an audible signal
sounds. The appliance stops heating.
Opening the appliance door affects the cooking result.
Open the appliance door only briefly. The automatic
programme is interrupted and continues to run after
closing the appliance door.
Adding extra cooking time
After the cooking time has ended, you can leave some
dishes to continue cooking if you are not satisfied with
the cooking result.
A query appears in the display asking if you want to
continue cooking.
1
Press
™
to confirm.
2
Select a single or double cooking time, depending
on requirements.
3
Press
I
to start.
4
If the "Continue cooking" function has ended, turn
the function selector to
0
.
Changing and cancelling
After starting the appliance, the settings can no longer
be changed.
If you want to cancel the operation, turn the function
selector to
0
.
Calling up the last automatic
programmes used
The last five dishes with the selected settings are saved.
You have the option of saving these dishes with the
selected settings as individual recipes. You can no
longer retroactively change the settings of individual
recipes if you have not saved it using the "Last
automatic programmes" function.
~
"Individual recipes"
on page 24
1
Set the function selector to
ž
.
i
is displayed.
2
Touch the
i
symbol.
3
Use the rotary selector to select "Last automatic
programmes" and press
™
to confirm.
4
Use the rotary selector to select the required dish
and press
™
to confirm.
5
Enter a name for the dish and save.
~
"Entering
names" on page 25
