18
en
Time-setting options
Safety shut-off
For your protection, the appliance is equipped with an
automatic safety shut-off. Any heating process is
switched off after 12 hours if the oven is not operated in
this time. A message appears in the display.
Exception:
The long-term timer has been programmed.
Set the function selector to
0
, then the appliance can be
operated again as usual.
O
Time-setting options
Time-setting options
You use the timer menu to make the following settings:
Š
Short-term timer
p
Stopwatch
6
Cooking time (not in standby mode)
5
Cooking time end (not in standby mode)
Calling up the timer menu
You can call up the timer menu from any mode. Only
from the basic settings, function selector is set to
S
, the
timer menu is not available.
Touch the
M
symbol.
The timer menu is displayed.
Timer
The timer runs independently of the other appliance
functions. You can enter a maximum of 90 minutes.
Setting the timer
1
Call up timer menu.
The "Timer"
Š
function is displayed.
2
Turn the rotary selector to set the required cooking
time.
3
Start with
I
.
6KRUWWHUPWLPHU
19
Time-setting options
en
The timer menu closes and the time begins to count
down. The
Š
symbol and the countdown appear in the
display.
A signal sounds once the time has elapsed. Touch the
™
symbol to silence.
You can exit the timer menu at any time by pressing the
'
symbol. This erases the settings.
To stop the timer:
Call up timer menu. Touch
C
to select the "Timer"
Š
function and touch the
H
symbol. To allow the timer to
continue counting down, touch the symbol
I
.
Switching off the timer early:
Call up timer menu. Touch
C
to select the "Timer"
Š
function and touch the
Ž
symbol.
Stopwatch
The stopwatch runs independently of the other
appliance functions.
The stopwatch counts from 0
seconds up to 90 minutes.
It also has a pause function, which enables you to
temporarily stop the clock.
Starting the stopwatch
1
Call up the timer menu.
2
Touch
C
to select the
p
"Stopwatch" function.
3
Touch
I
to start.
The timer menu is closed and the timing begins. The
p
symbol and the elapsed time are shown in the display.
Pausing and restarting the stopwatch
1
Call up the timer menu.
2
Touch
C
to select the
p
"Stopwatch" function.
3
Touch the
H
symbol.
The time stops. The symbol changes to
I
Start.
4
Touch
I
to start.
The time continues to run. When 90
minutes is reached,
the display pulsates and signal sounds. The signal stops
when you touch the
™
symbol. The
p
symbol on the
display goes out. The process has finished.
To switch off the stopwatch:
Call up the timer menu. Touch
C
to select the
p
"Stopwatch" function and touch the
Ž
symbol.
Cooking time
If you set a cooking time for your meal, the appliance
switches off heating automatically after the selected
time.
You can set a cooking time from 1 minute to 23 hours
59 minutes.
Setting the cooking time
You have set the type of heating and temperature and
placed your food in the cooking compartment.
1
Touch the
M
symbol.
2
Use
C
to select the
6
"Cooking time" function.
6WRSZDWFK
6WRSZDWFK