14
en
Before using for the first time
K
Before using for the first time
Before using for the first time
In this section, you can find out what you must do
before using your appliance to prepare food for the first
time. First read the section entitled
~
"Important
safety information" on page 5
.
The appliance must be fully installed and connected to
the mains.
After connecting the appliance to the power supply, the
"Initial settings "menu will be displayed. Now you can
now configure your new appliance for initial set-up.
Notes
–
The "Initial settings" menu will appear only after the
appliance has been connected to a power supply
and switched on for the first time, or if the
appliance has not been connected to a power
supply for a number of days.
Once the appliance has been connected to a power
supply, the GAGGENAU logo will appear first for
approximately 30
seconds. The "Initial settings"
menu will then appear automatically.
–
You can change the settings at any time in the basic
settings.
Setting the language
The preset language appears in the display.
1
Turn the rotary selector to select the required
display language.
2
Confirm with
™
.
Setting the time format
The two possible formats 24h and AM/PM appear in the
display. The default is the 24h format.
1
Use the rotary selector to select the desired format.
2
Confirm with
™
.
Setting the clock
The time is shown in the display.
1
Set the desired time using the rotary selector.
2
Confirm with
™
.
Setting the date format
The three possible formats D.M.Y, D/M/Y and M/D/Y
appear in the display. The default is the D.M.Y format.
1
Use the rotary selector to select the desired format.
2
Confirm with
™
.
Setting the date
The preset date appears in the display. The day setting
is already active.
1
Set the day using the rotary selector.
2
Touch the
C
symbol to switch to the month setting.
3
Set the month using the rotary selector.
4
Touch the
C
symbol to switch to the year setting.
5
Set the year using the rotary selector.
6
Confirm with
™
.
Setting the temperature unit
The two possible units °C and °F will appear on the
display. The default unit is °C.
1
Use the rotary selector to select the unit you
require.
2
Confirm with
™
.
Setting the water hardness
"Water hardness" appears in the display.
1
Check the mains water with the included carbonate
hardness test: fill the small measurement tube with
mains water up to the 5 ml mark.
2
Add drops of indicator solution until the color
changes from purple to yellow.
Important:
count the drops and carefully swing the
measurement tube after every drop until the liquids
have mixed thoroughly. The number of drops
corresponds to the water hardness.
3
Use the rotary selector to set the measured water
hardness. The value 12
is set by default.
4
Confirm with
™
.
Ending initial set-up
"Initial set-up complete" will appear on the display.
Confirm with
™
.
The appliance will switch to standby mode and the
standby display will appear. The appliance is now ready
to use.
Grease filter
Hook the enclosed grease filter onto the two bolts on
the back wall of the cooking compartment. Ensure that
you do not scratch the back wall when doing so.
Leave the grease filter in the cooking compartment for
all applications. Clean the grease filter with hot soapy
water or in the dishwasher every time heavy dirt
deposits have been left behind after cooking.
