Gaggenau BMP 250, Руководство пользователя и инструкции по установке

Страница: 17 / 44

Individual recipes
en
17
Dish Suitable food Weight range
in kg Cookware or accessories, shelf
height
Fresh chicken portions Chicken thigh, half chicken 0.40 – 1.60 Covered cookware
Cooking compartment floor
Meat loaf Meat loaf, approx. 8 cm deep 0.80 – 1.50 Uncovered cookware
Cooking compartment floor
Leg of lamb
1
Leg of lamb or boneless
shoulder of lamb 0.80 – 2.00 Uncovered cookware
Cooking compartment floor
1
Observe the signals given when it is time to turn the food.
14
Individual recipes
You can save, record or programme up to 50 indi-
vidual recipes. You can name your recipes so that you
can access them quickly and easily when needed.
14.1 Recording a recipe
You can set up to 5 phases one after the other and re-
cord these.
1.
Use the function selector to set the required mi-
crowave output setting or oven type of heating.
a The display shows ⁠.
2.
Press and use the rotary selector to select "Indi-
vidual recipes".
3.
Press to confirm.
4.
Use the rotary selector to select a free memory loc-
ation.
5.
Press ⁠.
6.
Use the rotary selector to set the cooking time, tem-
perature or grill setting.
7.
Press to start.
a The appliance records the first phase and you can
see the cooking time counting down. You can re-
cord an additional phase once the cooking time has
elapsed. To end the phase early, press ⁠.
8.
If required, select one of the options:
‒
To save the recipe, press and enter a name
under ABC.
→
"Entering a name", Page 17
‒
To cancel the recipe without saving, press ⁠.
‒
To continue the recording, carry out the following
steps.
9.
Press to continue the recording.
10.
Use the function selector to set the required mi-
crowave output setting or type of heating.
11.
Use the rotary selector to set the cooking time, tem-
perature or grill setting.
12.
Press to start.
a
For an oven type of heating, the appliance records
the cooking time.
13.
Press to end this phase.
a
The appliance saves this phase with the cooking
time.
14.
If required, select one of the options:
‒
To save the recipe, press and enter a name
under ABC.
→
"Entering a name", Page 17
‒
To cancel the recipe without saving, press ⁠.
‒
To continue the recording, repeat the previous
steps.
Notes
¡
When you open the appliance door, the recording of
the phase ends.
¡
You can operate the appliance in combined opera-
tion.
→
"MicroCombi", Page 13
14.2 Programming a recipe
You can programme and save up to 5 phases for the
preparation.
1.
Use the function selector to set the required mi-
crowave output setting or oven type of heating.
a
The display shows ⁠.
2.
Press and use the rotary selector to select "Indi-
vidual recipes".
3.
Press to confirm.
4.
Use the rotary selector to select a free memory loc-
ation.
5.
Press ⁠.
6.
Enter a name under "ABC".
→
Page 17
7.
Press ⁠.
8.
Use to select the first phase.
a The appliance displays the type of heating. You can
use the function selector to change the type of heat-
ing. Operation in combined operation is possible.
→
Page 13
9.
Use the rotary selector to set the cooking time, tem-
perature or grill setting.
10.
Select one of the following options:
‒
Press to select the next phase.
‒
Finish making entries once the preparation is
complete.
11.
Select one of the following options:
‒
Press to save.
‒
To cancel without saving, press ⁠.
14.3 Entering a name
1.
Enter a name for the recipe under "ABC".
2.
Use the rotary selector to select the letters.
A new word always begins with a capital letter.
Latin characters, certain special characters and
numbers are available.
3.
Briefly press to position the cursor to the right.
4.
Press and hold to switch to umlauts and spe-
cial characters.
5.
Press twice to insert a break.
6.
Briefly press to position the cursor to the right.
7.
Press and hold to switch to normal characters.
8.
Press twice to insert a break.