Gaggenau BMP 250, Руководство пользователя и инструкции по установке

Страница: 14 / 44

en
Automatic programmes
14
10.
Use to select "Cooking time" ⁠.
11.
Use the rotary selector to set the required cooking
time.
12.
Press to confirm.
a
The main menu for the sequential operation is dis-
played. The settings for the phases are shown on
the display bar.
13.
Press to start.
a
The appliance starts. You can see the cooking time
counting down.
a
Once the cooking time has elapsed, the appliance
switches off. A signal tone sounds. If you press ,
open the appliance door or set the function selector
to , you can end the signal early. The operation
has finished.
Notes
¡
You can add the combined operation to the sequen-
tial operation.
¡
You can only select the 1000 W microwave output
setting once.
¡
You cannot combine the oven types of heating with
the 1000 W microwave output setting.
¡
The order of each setting is entirely up to you. You
can start the duration, microwave output setting or
oven type of heating.
¡
If you open the appliance door during cooking, the
fan may continue to run.
Changing sequential operation
1.
Press ⁠.
a
The operation stops.
2.
Use the rotary selector to set the cooking time, tem-
perature or grill setting.
3.
Press and change the settings.
4.
Use to exit the menu.
5.
Press to start.
Deleting settings
▶
Press ⁠.
Interrupting the operation
1.
To interrupt the operation, press ⁠.
2.
Press to resume operation.
Cancelling the operation
▶
To stop the operation and delete the settings, turn
the function selector to ⁠.
Note:
The fan can also continue to run when the door
is open. This is normal.
12.2 Cooking time end
In oven mode, you can delay the cooking time end to a
later time. This function is not available in combination
with the microwave.
Enter the cooking time and delay the cooking time end
until 15:30, for example. The electronics system calcu-
lates the start time. The appliance starts automatically
at 14:50 and switches off at 15:30, for example.
Do not leave food which spoils easily in the oven for
too long.
Delaying the cooking time end
Requirement:
The type of heating, temperature and
cooking time are set.
1.
Use to select "Cooking time end" ⁠.
2.
Use the rotary selector to set the required cooking
time end.
3.
Press to confirm.
a The display shows a notification that a cooking time
end has been set.
4.
Press to confirm.
5.
Press to start.
a The appliance switches to standby. The display
shows the operating mode, the temperature, the
cooking time and the remaining time until the start.
a
The appliance starts at the calculated time and
automatically switches off once the cooking time
has elapsed.
a
Once the cooking time has elapsed, the appliance
switches off. A signal tone sounds. If you press ,
open the appliance door or set the function selector
to , you can end the signal early. The operation
has finished.
Changing the cooking time
1.
Press ⁠.
2.
Use to select "Cooking time" ⁠.
3.
Use the rotary selector to set the required cooking
time.
4.
Press to confirm.
5.
Press to start.
Changing the cooking time end
1.
Press ⁠.
2.
Use to select "Cooking time end" ⁠.
3.
Use the rotary selector to set the required cooking
time end.
4.
Press to confirm.
5.
Press to start.
Deleting settings
▶
Press ⁠.
Cancelling the entire procedure
▶
Turn the function selector to ⁠.
13
Automatic programmes
The automatic programs help you prepare different
dishes and automatically select the optimal settings.
13.1 Information on Automatic programmes
Follow these tips to achieve optimal cooking results:
¡
Only use food that is in perfect condition.
¡
Take the food out of its packaging and weigh it. If
you cannot set the exact weight on the appliance,
round the weight up or down.
¡
Only use microwave-safe, heat-resistant cookware,
e.g. made of glass or ceramic.
¡
Place the food in the cold cooking compartment.