Gaggenau BMP 250/251, Инструкция по эксплуатации

Страница: 17 / 44

17
Automatic programmes
The automatic programmes enable you to prepare food
very easily. You select the programme and enter the
weight of your food. The automatic programme makes
the optimum setting. You can select from 15
programmes.
Setting a programme
1 Use the function selector to set any operating
mode.
Note: The function selector must not be set to
ž
or
S .
2 Touch the "chef's hat"
i
symbol and the automatic
programmes are displayed.
3 Touch
™
to confirm.
The first programme appears in the display.
4 Use the rotary selector to select the required
programme, e.g. Cook: "Fresh vegetables".
5 Use
%
to select the weight
n
function.
6 Use the rotary selector to set the weight.
7 Touch
™
to confirm.
8 Touch
I
to start.
The operation begins. You can see the cooking time
counting down.
An audible signal sounds once the cooking time has
elapsed. The signal stops prematurely if you touch the
™
symbol, open the appliance door or set the function
selector to 0 . The programme has ended.
Standing time:
Some dishes must be left to stand after the programme
ends, in order to reach an even temperature or for
subsequent cooking. Wait until the standing time has
elapsed before removing the food from the oven.
Tips:
Touch
*
to receive tips on cookware, accessories and
shelf position. Touch
™
to exit this display.
Notes:
Touch
(
to view notes for the preparation. The
)
symbol
is displayed for important information and action
prompts. Touch
™
to exit this display.
For some dishes, during the preparation stage, the
display shows information about turning or stirring.
Follow this information. When you open the appliance
door, the operation stops. After the door is closed,
continue the operation by touching
I
. If you do not turn
or stir the food, the programme will continue on until its
end, as normal, anyway.
Pause:
You can touch
H
to suspend the operation. Touch
I
to
continue the operation.
Switching off:
To cancel the operation and delete the settings, turn the
function selector to
0 .
Individual adjustment
If the cooking result of a programme does not meet
your expectations, you can make individual adjustments
before the programme starts. Enter the settings as
described in steps 1 to 4.
1 Use
%
to select the individual settings.
2 Use
C
to select the
o
"Cooking result" function.
3 Set the cooking result using the rotary selector.
Anti-clockwise = cooking result less well done.
Clockwise = cooking result more well done.
4 Confirm with
™
.
The display switches to the programme. The
cooking time is changed accordingly.
$XWRPDWLFSURJUDPPHV
)UHVKYHJHWDEOHV
K NJ
PLQ
VHF
$
&RRNLQJUHVXOW