Gaggenau BMP 250/251, Инструкция по эксплуатации

Страница: 13 / 44

13
You can change the temperature at any time using the
rotary selector.
You can change the heating type at any time using the
function selector. Restart by touching
I
.
Pause:
You can touch
H
to suspend the operation. Touch
I
to
continue the operation.
Switching off:
To cancel the operation and delete the settings, turn the
function selector to
0 .
Calling up the current temperature:
When you touch the
(
symbol, the current oven
temperature is shown for a few seconds in the display
(from 100 °C). Touch the
™
symbol to return to the
standard display.
Note: During continuous operation after heating up,
slight deviations in temperature are normal, depending
on the type of heating.
Rapid heating
The "Rapid heating" function brings your appliance to
the desired temperature quickly.
To ensure an even cooking result, only put your food in
the cooking compartment when the "rapid heating"
phase is complete.
You must activate the "Rapid heating" function in the
basic settings (refer to the
Basic settings
section).
Safety shut-off
For your protection, the appliance is equipped with an
automatic safety shut-off. Any heating process is
switched off after 12 hours if the oven is not operated in
this time. A message appears in the display.
Exception:
The long-term timer has been programmed.
Set the function selector to 0 , then the appliance can be
operated again as usual.
Full surface grill
In grill mode, you can select one of three grill settings:
Setting the full surface grill
1 Use the function selector to set the full surface
grill.
The display shows the symbol for the full surface
grill
Q
and grill setting 3.
2 Use the rotary selector to set the grill setting.
Note: If you want, you can now set the cooking time
for your food and delay the cooking time end to a
later time. Touch the
h
symbol; the sequential
operation menu appears. Touch
C
to select and set
the "Cooking time"
6
function. Touch
C
to select
and set the "Cooking time end"
5
function.
More detailed information on this is described in
the section
Sequential operation
.
3 Touch
I
to start.
You can change the grill setting at any time using the
rotary selector.
You can change the operating mode at any time using
the function selector. Restart by touching
I
.
Pause:
You can touch
H
to suspend the operation. Touch
I
to
continue the operation.
Switching off:
To cancel the operation and delete the settings, turn the
function selector to
0 .
Heating function Grill setting Use
Q
Full surface
grill 1 (low) For soufflés and deep
bakes
2 (medium) For flat bakes and fish
3 (high) For steaks, sausages
and toast