Gaggenau AH 900791, Инструкции по эксплуатации и монтажу

Страница: 12 / 48

Deactivate the wall hood's power supply as
described on Page 4.
First remove the grease filter.
Detach the lamp cover by removing the screws that
secure the lamp cover to the inside of the housing.
Remove the securing clip and first pull the
fluorescent lamp downwards out of the plastic
holder and then horizontally out of the socket.
Defective fluorescent lamps must only be
replaced by lamps of the same type.
The original spare part:
•
for AH 900-76 1
spare part number 211406
•
for AH 900-79 1
spare part number 292103
is available from specialist dealers or your
Gaggenau after-sales service.
Insert the new fluorescent lamp in the socket so
that it audibly engages. Then press the lamp
securely into the plastic holder and close the
securing clip onto the holder. The lamp is now
secure against dropping out.
Clean the lamp cover in mild detergent and then
secure it on the hood again.
Connect the unit to the power again.
Note:
As standard, your hood contains a fluorescent tube
with the colour „bright white". This ensures
optimum illumination of your cooking area. If you
wish a different colour, you can order the colours
„warm tone" and „Interna” from your specialist
dealer.
Lamp replacement
12