4
REV. 6/22
GB786/204 INSTALLATION TOOL
SPECIFICATIONS
Weight
-
19 lbs. (8.61 kg)
Air pressure req'd
-
90
-
100 p.s.i. (6.2
-
6.9 bar)
Air consumption
-
.30 c.f.m., based on 20 cycles/min.
Hydraulic oil
-
Automatic Transmission oil,
Dexron® III, or equivalent.
Setting stroke
-
.500" (12.7mm)
Rated pull load
-
5,200 lbs. (23.1 kN)
Noise level
-
Less than 81.5 dB(A)
The GB786/204 Split Pneumatic
-
Hydraulic Installation Tool is designed specifically for the efficient installation of blind rivet and lock-
bolt fasteners. This tool
’
s unique "split" system provides the operator with a lightweight ergonomic tool for a fraction of the cost of
other cumbersome power rigs. It has a .500" (12.7mm) fastener setting stroke with a rated pull load of 5200 lbs. (23.1 kN) at 90 psi. (6.2 bar)
air pressure at the air inlet.
The GB786/204 comes with 8 ft. (2.4 m) of hose and a remote actuator. The GB204 cylinder when held in your hand, weighs just 2.0 lbs.
(0.91 kg), while the entire split Pneumatic
-
Hydraulic Installation Tool weighs 19 lbs. (8.61 kg).
The GB786/204 Split Pneumatic
-
Hydraulic Installation Tool operates on 90
-
100 psi. (6.2 bar to 6.9 bar) with 90 psi. (6.2 bar) providing
maximum efficiency. At 90 psi. (6.2 bar), air pressure in the GB786/204 does not exceed 81.5 dB (A) and consumes .30 c.f.m., based on
20 cycles/min.
This tool accepts all patented GB204 style nose assemblies. NOSE ASSEMBLIES ARE NOT FURNISHED WITH THE TOOL AND MUST
BE ORDERED SEPARATELY. (See nose assembly selection chart on pg. 19).
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB786/204 can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
