Gadspot S series Скачать руководство пользователя страница 69

Страница: 69 / 77

H.264 Super Digital Video Recorder User Manual

Picture 5.11 Mobile client interface 2.

Note: If the DVR is in LAN when monitoring, the mobile phone need to connect wireless router to access the device;

The corresponding client software for different mobile phone system is shown as below (please refer

auxiliary

software in the optical disk because of different version)

Mobile phone client of the third version of Symbian S60 is: MEYE_SB_S60_3rd.sisx

Mobile phone client of the fifth version of Symbian S60 is: MEYE_SB_S60_5rd.sisx

Mobile phone client of Android system is: vMEyeSuper.apk

Mobile phone client of Blackberry system is: MEYE_RIM.cod

Mobile phone client of Apple system is: vMEye (please search and install in Appstore)

Note: Mobile phone monitoring software can also support cloud technology access.

6. FAQ and use and maintenance

6.1 FAQ

If the problems are not listed, please contact the local service or call the HQ service. We are willing to offer

the service.

、

The DVR can not boot up normally.

Possible reasons are as followed:

The power supply is not correct.

Switch power supply line is not in good connection.

Switch power supply is damaged.

The program updating is wrong.

The hard disk is damaged or the hard disk lines are broken.

The front panel is damaged.

The main board of the DVR is damaged.

、

The DVR reboots automatically or stops working after boot up a few minutes.

Possible reasons are as followed:

The input voltage is not stable or too low.

The hard disk is damaged or the hard disk lines are broken.

Содержание S series














































































Результаты поиска

Содержание S series

Отзывы:

Gadspot S series, Руководство пользователя, Страница: 69 / 77

Результаты поиска

Содержание S series

Отзывы: