H.264 Super Digital Video Recorder User Manual
21
Step 2: click the Preset button, and then write the preset points in the input blank.
Step 3: click Set button, return the Picture 3.8 Complete setup, that is the preset points and preset position
corresponds.
Remove Preset
：
Input preset points, click Remove button, remove the preset.
Picture 3.9 Preset Settings
2
）
Preset Point Calls
In Picture 3.8, click Page Shift button, enter PTZ control interface as shown in Picture 3.10. In the input
blank, write the preset points, then click Preset button, PTZ turn to the corresponding preset point.
Picture 3.10 PTZ Control
2
、
tour
Multiple preset points connected cruise lines, call cruise between points, the PTZ run around on the line
1
）
Cruise Between Points Settings
Cruise lines are connected by multiple preset points, setting procedure is as follows:
Step1: In Picture 3.8, the Direction key will turn PTZ to designated location, click Settings button to
enter Picture 3.11.
Step 2: click Cruise buttons, the write proper value into the Cruise Line and Preset Points blank
，
then
click Add Preset Points button, complete setting (also can add and delete cruise line which has been set up).
Preset button
Preset point input blank
Value input blank