to use the WavePRO interface
Windows NT 4 driver for Wave/824
n
After installing the hardware, turn on the power and boot your PC
into Windows NT.
n
After NT has booted, click on '
Start',
then '
Settings',
then '
Control
Panel'.
n
Double click on the icon called,
'Multimedia'
n
A new window will appear, with a series of tabs up at the top.
Click on the '
Devices'
tab. Under the devices tab, click on the
button called
'Add'
.
n
A new window will appear showing a list of devices. Choose the
top line, '
Unlisted or Updated Driver',
and click, 'OK'.
n
A new window titled,
'Install Driver'
will appear.
Insert the
Wave/824 Drivers Diskette into the floppy disk drive. In the box
which has a drive letter and path, change that to read:
a:\nt
where 'a' is your floppy disk drive letter.
n
A new window will appear listing the
'Gadget Labs Wave/824'
Double Click it. It will install the drivers and ask you to reboot your
machine. Now have fun!!
INSTALLING THE CLOCK SYNC CABLE FOR
MULTIPLE WAVEPRO CARDS
If you have 2 or 3 WavePRO cards, you should connect them together
with the optional clock sync cable. This will ensure that all the audio
channels use the same hardware clock timing and won't drift apart.
Sync Cable
Make sure that
the CLOCK SYNC
CABLE is plugged
into the CLOCK-
OUT jack on one
card & the
CLOCK-IN jack
on the other
card.
6
