ASIO Control Panel
In addition to the settings in the 'Audio System Setup' windows, a few
additional settings are available that are specific to WavePRO.
Normally, you won't need to change these settings, but they are
provided in case you experience any performance issues or
dropouts when recording or playing audio tracks
n
In the 'Audio System Setup' window, click on the button, 'ASIO
Control Panel' and a dialog box will be displayed.
n
Change the settings to increase processing priority for the
Wave/824 or extend the audio data buffer size.
19
Setting up Samplitude 2496 for WavePRO
Samplitude is a popular multi-track digital audio program from
Germany. Follow these steps to configure the program for the
WavePro interfaces. Settings not mentioned here can be left at their
default values.
n
The initial step in using Samplitude is to setup a new virtual
project (a VIP). To do this, select the menu item ‘File | New
Multitrack project’. A dialog box will appear. Choose the
number of tracks you will use. (Note: these are virtual tracks
and you are not limited to 8. The maximum number of tracks is
determined by the performance capability of your PC).
n
Next select the length of your project (default is 1 minute).
Then, select your sampling rate (default is 44100). Depending
on the model, the WavePRO interface will support sampling
rates up to 48000 or 96000.
n
After the VIP is setup, make sure that ‘
Multi-card mode
’ is
active
(green). This option can also be set with the menu item,
‘File | Properties | Multiple cards’.
n
Recording: select ‘File | Record’ or click on the Record button
(it’s a red circle). The Record dialog box will be displayed.
n
Set the record mode to
Stereo
or
Mono
.
