Gabarron MATTIRA MAC15B, Инструкция по установке и руководство пользователя

Страница: 32 / 44

32
8 MAIN COMPONENTS LIST
9 MAINTENANCE & CARE
Gabarron MATTIRA electric combi boilers will require an annual maintenance check to ensure preservation of the
manufacturer's warranty and a prolonged and trouble-free life. A full check list and service log is located at the back of this
manual which, should be adhered to. The following points below should also be constantly observed:
-Check and maintain the heating system pressure between 1 & 1.5 bar when cold. Frequent re-filling of the system could
cause scaling and corrosion and should be avoided. Regular pressure loss could indicate a leak and should be investigated
promptly.
CAUTION – Under no circumstances should the boiler be switched on when the system is dry.
CAUTION - Never start the boiler when the DHW tank is empty; to fill it for the first time open a hot water tap
and wait until water comes out of it.
- Keep the ventilation openings on the boiler clear to ensure correct operation and protect from overheating. Do not place
or store objects on the boiler.
- Protect against freezing by ensuring power is maintained to the boiler at all times, unless the water supply is interrupted or
the heating system is empty. In dwellings, frequently un-occupied or at risk of freezing, an appropriate anti-freeze can be
added to the heating system at a concentration of not more than 30% by volume. Otherwise it is recommended to isolate
the power and completely drain the heating and hot water systems.
- The outer case can be cleaned with a damp cloth having first isolated the boiler from the mains. Do not use solvents or
abrasive cleaners.
10 ENVIRONMENTAL INFORMATION
Gabarrón boilers are manufactured within a certified environmental management system. From the design stage, all the
production phases are performed taking into account the most rigorous environmental requirements. For example, the
selection of materials involves guaranteeing their biodegradability, re-use and recycling.
When this boiler’s long, useful life is over; it must be handed in to an electrical equipment collection point for proper
recycling. By ensuring that this product is correctly disposed of, you will help to avoid any possible negative effects on the
environment and public health that could occur if this product is not properly handled. To obtain more detailed information
on the recycling of this product, contact your local authority, your waste disposal service or the shop where you purchased
the product.
These regulations only apply in EU member countries.
Heating expansion vessel 6L ref. 60091510
DHW. expansion vessel 3L ref. 60105580
DHW. expansion vessel hose MAC ref. 60101950
50 L DHW. insulated tank ref. 60105560
Insulated heating header tank ref. 60101700
Circulation pump RKC130 ref. 60190076
Main electronic PCB MAC ref. 60105585
Power PCB MAC with support ref. 60105595
Temperature sensor white ref. 60105600
Temperature sensor black ref. 60105605
15 kW heating resistance & joint 140 ref. 60100750
15 kW DHW. resistance & joint ref. 60100700
DHW. resistance joint ref. 60105670
Heating resistance joint ref. 60091090
¾” hea ting flow detector ref. 60100805
0-4 bar pressure gauge ref. 60100820
100°C thermal limiter ref. 60101860
80°C thermal limiter ref. 60101870
Automatic purge ref. 60091280
3 bar central heating relief valve ref. 60100840
7 bar DHW. P&T relief valve ref. 60105660
½ ” filling / shut off valve ref. 60105686
Keyboard MAC ref. 60105555