Gabarron IGB09MB-K3DNB7G Скачать руководство пользователя страница 11

Страница: 11 / 40

●

After selecting auto mode, air conditioner will operate automatically according to

ambient temperature. Set temperature can’t be adjusted and also can’t be displa-

yed. Press "FAN" button can adjust fan speed. Press " " button can adjust

swing angle.

●

After selecting cool mode, air conditioner operates under cool mode. Cool indicator

" " on indoor unit is ON. You can press "+" or "-" button to adjust set temperature.

Press "FAN" button can adjust fan speed. Press " " button can adjust swing

angle.

●

After selecting dry mode, air conditioner operates under dry mode at low speed.

Dry indicator " " on indoor unit is ON. Under dry mode, fan speed can’t be ad-

justed. Press " " button to adjust swing angle.

●

After selecting fan mode, air conditioner operates only under fan mode, All mode

indicators on indoor unit is OFF. Operation indicator is ON. Press "FAN" button can

adjust fan speed. Press

●

After selecting heat mode, air conditioner operates under heat mode. Heat indicator

" " on indoor unit is ON. You can press "+" or "-" button to adjust set temperature.

Press "FAN" button to adjust fan speed. Press " " button to adjust swing angle

(Cooling only unit can’t receive the signal for heating mode.)

Introduction for buttons on remote controller

Note:

●

After putting through power, air conditioner will give out a sound and operation

indicator " " is ON (red indicator). You can operate the air conditioner through

the remote controller.

●

At ON status, after each pressing button on remote controller, the signal icon " "

indicates the signal has been sent to air conditioner.

●

At OFF status, display screen on remote controller displays set temperature.

At on status, display screen on remote controller displays the corresponding startup

function’s icon.

ON/OFF button

MODE button

Press this button can turn on or turn off the air conditioner. After turning on the unit,

operation indicator " " on indoor unit is ON (green indicator. Color may be differ-

ent for different models)and indoor unit gives out a sound.

Press this button can select your required operation mode.

AUTO COOL

FAN

DRY

HEAT

" " button to adjust swing angle.

Содержание IGB09MB-K3DNB7G









































Результаты поиска

Содержание IGB09MB-K3DNB7G

Отзывы:

Похожие инструкции для IGB09MB-K3DNB7G

Бренды по названию

Популярные бренды

Gabarron IGB09MB-K3DNB7G, Руководство пользователя

Результаты поиска

Содержание IGB09MB-K3DNB7G

Отзывы:

Похожие инструкции для IGB09MB-K3DNB7G

Бренды по названию

Популярные бренды