Operation guide
Replacement of batteries in remote controller
1. Press the back side of remote controller marked
the cover of battery box along the arrow direction.
2. Replace two 7# (AAA 1.5V) dry batteries, and
make sure the position of "+" polar and "-" polar
are correct.
3. Reinstall the cover of battery box.
signal sender
battery
Cover of battery box
remove
reinstall
Note:
● During operation, point the remote control signal sender at the receiving
window on indoor unit.
●
The distance between signal sender and receiving window should be no
more than 8m, and there should be no obstacles between them.
or wireless telephone; remote controller should be close to indoor unit during
operation.
● Replace new batteries of the same model when replacement is required.
● When you don’t use remote controller for a long time, please take out the
batteries.
● If the display on remote controller is fuzzy or there’
s no display, please
replace batteries.
1.
After putting through the power, press " " button on remote controller to
turn on the air conditioner.
2.
Press " " button to select your required mode:
AUT
O, COOL, D
RY, FAN,
HEAT.
3.
Press "+" or "-" button to set your required temperature. (
T
emperature can’t be
adjusted under auto mode).
4.
Press " " button to set your required fan speed: auto, lo
w, medium and
high speed.
5.
Press " " and " " button to select fan blowing angle.
ON/OFF
MODE
FAN
13
Содержание IGB09MB-K3DNB7G
Страница 2: ......