G21 RIVER, Руководство пользователя

Страница: 5 / 28

Installation steps
Tile or dry wall
1. Tape the installation template at the appropriate location on the mounting surface.
2. Drill 4 holes at marked locations diameter.
3. Insert 4 plastic anchors (supplied) into drilled holes.
4. Insert 2 screws (supplied) into top plastic anchors and leave space from the wall under head
for hanging dispenser.
5. Hang the dispenser on the 2 screws through the key hole slots at back plate top.
6. Use key to unlock and pull forward the housing cover.
7. Remove soap reservoir and lock dispenser to wall with remaining 2 screws through the holes at
back plate bottom. Tighten all srews.
Pay attention:
the raised part of the white plastic should be installed in the outside of the black
plastic.
Adhesive on mirror
1. Clean mounting surface in area to be installed with alcohol.
2. Mark outline of dispenser on mirror with masking tape.
3. Remove paper liners from self-adhesive pads on dispenser back plate.
4. Place unit on mounting surface with even steady pressure and hold for 1 minute.
5. Let tape cure for 10 hours prior to filling dispenser with soap for use.