G-Tek LmNet - PRO 614-00, Руководство по эксплуатации

Страница: 41 / 53

G-Tek Corporation Private Limited 40
7.3.9.6 Resolution Decimal Place
This is the measure of the accuracy of the output value. It is the measure of number of digits that
user wants to include in the output display.
For example:
If the output is 2.301 then according to user, he can set the display output.
If Resolution is kept 0 then output is 2
If Resolution is kept 0.1 then output is 2.3
If Resolution is kept 0.01 then output is 2.30
If Resolution is kept 0.001 then output is 2.301
If Resolution is kept 0.0001 then output is 2.3012
To set the Resolution Decimal Place for a channel then follow the procedure shown in figure- 45 by
pressing the appropriate buttons given in the front panel of the LmNet.
7.3.9.7 Alarm Set Point High
In this parameter we must set the value to alert us whenever device reading goes higher than the set
value, and that value should be set from -3276.8 to 3276.7
To set the Alarm Set point High for a channel then follow the procedure shown in figure- 44 by pressing
the appropriate buttons given in the front panel of the LmNet.
Press up key and down
key to change the value
0.1
rESoLUtn
SAvE
1 128.55
Figure 43 Resolution Decimal Place
Figure 44 Alarm Set point High
Press up key and down
key to change the value
150
ALrm SPH
SAvE
1 128.55