G-Tek LmNet - PRO 614-00, Руководство по эксплуатации

Страница: 33 / 53

G-Tek Corporation Private Limited 32
7.3.6 Alarm Off time
Alarm Off time is user settable parameter in seconds and minutes, which will temporary off buzzer
and relay as input by user. However, it will off after pressing of key patterns as shown in figure to stop
buzzer and relay.
To set the Alarm off time, follow the procedure shown in figure- 33 by pressing the appropriate
buttons given in the front panel of the LmNet.
7.3.7 Channel Scan
This functionality will allow to skip the output data from four channels, it will not scan that channel
even if sensor is connected on channel connector and will give output “ Nan ” on display . After entering
to any channel, user have option “ON” or “SKIP” channel using up -down key.
To set the channel skip, follow the procedure shown in figure- 34 by pressing the appropriate buttons
given in the front panel of the LmNet.
Figure 34 Channel Skip
Figure 33 Relay OFF time
ALrm oFF
OFF
SECond
mInUte
1 128.55
0 to 59
0 to 240
SAvE
SAvE
CHnL SCn
CHnL 1
CHnL 2
1 128.55
on
on
Save
Save
CHnL 3
SKIP
CHnL 4
SKIP
Save
Save