G-Technology G Speed studio, Руководство по эксплуатации продукта

Страница: 49 / 119

p. 49
Configuring G-SPEED Studio R
Changing Redundancy Check Settings
To change Redundancy Check settings:
1. Click on the
Background Activities
icon.
2. Click the
Settings
button.
3. Click the
Redundancy Check Rate
drop-down menu and choose a rate:
•
Low
: Fewer system resources are required for redundancy checking, leaving
more resources for data read/write operations.
•
Medium:
Balances system resources between redundancy checking and data
read/write operations.
•
High:
Allocates more system resources to Redundancy Check and fewer to
data read/write operations.
4. Click the
Confirm
button.
5. Click the
X
icon to close the background activities panel.
Initialization
Initialization is normally done to logical drives after they are created from a disk array.
Initialization sets all data bits in the logical drive to zero. This action is useful because
there may be residual (possibly sensitive) data on logical drives left from earlier
configurations. For this reason, initialization is recommended whenever you create
a logical drive.
Note: You cannot access a logical drive while it is initializing.
See
Initializing a Logical Drive
.