Programming Dial to Open
e
-com (WHL List) (Caller ID)
You can open the gate direct from a mobile phone or landline by calling the simcard number.
Once you call the number the GSM Intercom will reject the call and take the command to
open the gate.
We have a caller ID function controlled by a text command If this is set to
ON
only the
numbers stored in the intercom will be accepted to open the gate. If it is set to
OFF
there is
NO
caller ID security and any caller can open the gate.
To turn caller ID function on send the text
#
WHL
=
ON
#
To turn called ID function off send the text
#
WHL
=
OFF
#
To program a number to the caller ID (whl) list you will need to send a text message code:
#
WHL
=
NUMBER
#
To delete the number send a text message code:
#
DEL
=
NUMBER
#
Example
#
WHL
=
07713099514
#
to store you mobile number.
Example
#
DEL
=
07713099514
#
to delete mobile number.
If the code is accepted the unit will reply “
WHL number stored
”
If the code is accepted the unit will reply “
WHL number deleted
”
To reset all numbers you can text the code
#
WHL
=
RESET
#
This will delete all your WHL numbers using the one command.
NOTE
- It will not affect the call button numbers
To open the gate permanently from your phone you can send a text
Relay Pulse Time
The default pulse time for the relay is 2 seconds. You can increase this to 10 seconds for
each relay using the following text commands
#
RELAY
=
SLOW
# -
The relay will pulse for 10 seconds
#
RELAY
=
FAST
#
-
The relay will pulse for 2 seconds
Page 8
