G.S.M Activate e-com, Руководство пользователя

Страница: 5 / 11

The Intercom can be reset by texting
# FACTORY = RESET #
WARNING This will return the unit to its factory setting and you will lose all of your
programming.
Microphone and Speaker Volume
There are 3 levels of sound for both the microphone and Speaker, these can be set using the
following SMS text commands
Speaker
# SPK = LOW # - Low
# SPK = MEDIUM # - Medium (default)
# SPK = HIGH # - High
Microphone
# MIC = LOW # - Low
# MIC = MEDIUM # - Medium (default)
# MIC = HIGH # - High
Page 5
Programming the
e
-com Call Button Entry
On the front panel there is one intercom call button. Pressing this call button will dial the
primary and then the divert number if there is no answer from the primary number. To
programme these numbers you will need to send a text message code which will store the
number you want to use in either the primary or divert position.
Example
# PRI = 07123456789 # This stores the mobile phone number as the primary number for the
call button
# DIV = 07234567891 # This stores the mobile phone number as the divert number for the
call button
If the code is accepted the unit will reply “ PRI number stored ” or “ DIV number stored ”
To delete either the primary or divert number please follow the examples below
Primary Number
# PRI = DELETE #
Divert Number
# DIV = DELETE #
Note - there is a maximum of 15 digits per phone number stored