Using
e
-com Call Button Entry
Once the numbers have been programmed for each button, the call buttons are ready to be
used. Visitors will press a call button on the intercom. This will then call the stored primary phone
number. If the call is not answered it will then try the divert number.
When you answer the call you can talk to your visitor at your gate/door. When you are happy to let
them in you can press ANY key on your phone keypad to allow access
ANY KEY
Allows access
If you are awaiting a visitor you can text the unit so that the gate/door will remain open by sending
the command
#
OPEN
#
To release the gate from being held open, this can only be done by sending the text command as
follows
#
CLOSE
#
Some gate control panels may not have this facility to hold the gate open. Please refer to your gate
control manual.
NOTE -
You only have 120 seconds to talk to your visitor before the intercom automatically
hangs up the call.
Page 6
