G-RAIL 6200 Series, Руководство пользователя

Страница: 52 / 140

14
3
!
!
Setting curtain positions
English
STEP 5
Aim:
Set the “Curtain open” position.
Method: Now press the other button and keep it pressed until the curtain
reaches the desired “open” position.
STEP 6
Aim:
Fine tune and confirm the “Curtain open” position.
Method: Use the two buttons to adjust the curtain postion as desired, then
briefly press both buttons at the same time to confirm the posi-
tion.
See: The system will move a short distance, in close direction, and the
red LED underneath the motor-unit will go out.
The positions have been adjusted and the rail is ready for use. See chapter 4 for
function options.
− In the event of a power cut, the position settings in the motor-unit will be maintained.
− If the system/curtain is moved without power being supplied (i.e. during a power cut), it will
lose its reference positions and they will have to be re-entered.
Adding/removing curtain positions
In order to change or add curtain positions in a system, you must repeat the above steps 1 to 6
of “setting curtain positions” for that system.
Changing button functions for opening and closing
Repeat the procedure for “Setting curtain positions with the 2-button switch or buttons on
underside of the motor-unit”, selecting the switch buttons in reverse order.
For several linked systems:
Remember that changing the “open” and “close” positions will have consequences for any
central control of linked systems; for example, a central “close” command will result in the
system being opened.