13
120v
LITHIUM-ION
TM/MC
- Injuries and damage to property due to
broken application tools or the sudden impact
of hidden objects during use.
- Danger of injury and property damage
caused by flying objects.
Warning!
This product produces an
electromagnetic field during operation! This field
may under some circumstances interfere with
active or passive medical ivmplants. To reduce
the risk of serious or fatal injury, we recommend
persons with medical implants to consult their
doctor and the medical implant manufacturer
before operating this product!
ASSEMBLY
Unfold the handle
1. Rotate the handle quick release levers to
release the operation handle. (See Fig. 5).
2. Rotate the handle and then position the lower
handle lock pin into the mower bracket - one
of the three angle positions. (See Fig. 6)
3. Lock the handle in place by closing the quick
release levers- make sure that the handle is
securely locked in position. (See Fig. 7)
Check the cable clips fitting
Make sure the cable clips fits on upper handle
securely and the cable into the cable clips.
(See Fig. 7)
Fit grass bag onto the mower
1. Lift the rear flap and remove the pre-
assembled mulching plug from the machine.
(See Fig.9)
2. Insert the grass bag onto the hooks. Release
the rear flap to secure the grass bag in
position. (See Fig. 10)
Installing the mulching plug
NOTE:
Switch off the tool and make sure that the
blade has stopped completely. Then remove the
battery completely.
1. Lift the rear flap with one hand and push
the mulching plug into the rear discharge
chute until it is locked in place. Make sure
that the mulching plug is locked in position.
(
See Fig. 11
)
.
2. Release the rear flap, it will close back to
cover the mulching plug.
3. If you want to remove the mulching plug, hold
the handle of the mulching plug, press down
the hook with your finger, meanwhile lift it
upward slightly and pull it out.
Installing the side discharge chute
NOTE:
Switch off the tool and make sure that the
blade has stopped completely. Then remove the
battery completely.
1. The mulching plug should be installed as
described above.
2. Lift the side discharge cover with one hand
and hook in the side discharge chute with the
other hand. (See Fig. 12)
3. Release the side discharge cover to secure
the chute in position. (See Fig. 13)
Set required function
WARNING!
Before changing any
accessory, switch off the tool and make sure that
the blade has stopped completely. Then remove
the battery completely.
NOTE:
This lawn mower has three functions.
These functions can be converted by changing
accessory setting as described above. Please
see the following chart for detail.
Mulching
plug
Grass
bag
Side
discharge
chute
Collection *
×
√
×
Mulching *
√
×
×
Side Discharge
*
√
×
√
“√”: installed “×”: uninstalled
* The following information:
Collection: the grass has been cut and collected
by grass bag.
Mulching: mulch the grass, by cutting into small
pieces which then degrade and fertilise the lawn
Side discharge: the grass has been cut and
distributed to the side of the machine.
Содержание PRO Y0LMX22S300
Страница 4: ...4 TM MC Fig 5 Fig 7 Fig 9 Fig 11 Fig 6 Fig 8 Fig 10 Fig 12...
Страница 5: ...5 120v LITHIUM ION TM MC Fig 14 Fig 16 Fig 18 Fig 20 Fig 15 Fig 19 Fig 17 Fig 13...
Страница 23: ...23 120v LITHIUM ION TM MC Fig 5 Fig 7 Fig 9 Fig 11 Fig 6 Fig 8 Fig 10 Fig 12...
Страница 24: ...24 TM MC Fig 14 Fig 16 Fig 18 Fig 20 Fig 15 Fig 19 Fig 17 Fig 13...
