10
GRINDER G400
Original Instructions Rev.01
-
2017 in compliance with the § 1.7.4 of the Machines Directive 2006/42/CE
G.B.C. Industrial Tools S.p.A.
Via Sandro Pertini 41/43 –
25046
Cazzago San Martino (Bs) –
Italia –
Tel. + 39 030 7451154 –
email: [email protected]
NOTE:
G.B.C. Industrial Tools S.p.A, declares that every machine is tested on steels commonly user in mechani
-
cal and metal work fabrication with 50mm wall thickness. The figures listed in the above chart, are de
-
tected by a phonometer certified by an acoustic calibrator mod. DELTA HOM HD 9102 certified by
LAT (former SIT) N. SIT 03229/09 and we confirm such figures are in compliance with the regulation
EN 60745.
Therefore according to the evaluation of the environmental risk of the workplace, regulated by the Law
Decree.81/08 and following variations, actuating the directive2003/10/CE, according to the Art. 190 of
the above mentioned Decree, the staff responsible of the G400 must be formed and educated in renard to
the above said regulation , and must be equipped with the (DPI) and acoustic control upon request of the
worker, when deemed opportune by the doctor in charge.
EXAMPLE OF A GRINDING DISC IDENTIFICATION TAG
THE ABRASIVE DISC MUST HAVE THE FOLLOWING FEATURES:
Max. Ø 410
Thickness: 8
÷
16 mm
Flange Seat : Ø60
RPM max.3810/min
Max.80m/s
Reference Code: EN 12413 ÷ ANSI B7.1
Expiry Date and binder features are clearly stated on the abrasive wheel.