G.B.C G400, Инструкция по эксплуатации

Страница: 6 / 27

6
GRINDER G400
Original Instructions Rev.01
-
2017 in compliance with the § 1.7.4 of the Machines Directive 2006/42/CE
G.B.C. Industrial Tools S.p.A.
Via Sandro Pertini 41/43 – 25046 Cazzago San Martino (Bs) – Italia – Tel. + 39 030 7451154 – email: sales@gbcspa.com
•
Read ALL the following regulations and instructions;
• Ensure that the foreman that is using the machine is fully aware of all the regulations and instruc-
tions and that is qualified to operate the unit.
• Strictly attain to the indications and the international symbols portrayed in the present manual;
•
Do not perform technical maintenance while the machine is plugged to the power source.
•
Before every use ensure that the connection to the power source is in compliance with the specifica-
tions provided by the G.B.C. manual.
The authorized operator should not in any case disregard the basic safety regulation such as:
•
Using gloves and goggles (safety gear supplied by the company responsible for the
site or for the building)
•
To properly illuminate the working area;
•
Ensure you are operating in an area which grants free movements (at least 2 metres
around the operator);
•
Do not replace the control system and do not replace worn parts with non
-
genuine
GBC parts
•
Do not use water jets on the machine;
•
Do not get near the machine while it is running.
G.B.C. Industrial Tools S.p.A. recommends that for any particular case not mentio
-
ned in
this manual, the manufacturer ’ s authorization is necessary