20
ELECTRONIC GRINDER G300
Original Insgtructions
-
Rev. 00
-
.2018—In compliance with § 1.7.4 of the Machine Directive 2006/42/CE
G.B.C. Industrial Tools S.p.A.
Via Sandro Pertini 41/46 – 25046 Cazzago S.Martino (BS) – Italia – Tel. + 39 030 7451154 – Info: [email protected]
−
4) Adjust the angle of incidence by rotating the central
screw in one direction or the other with the specific Allen Key
−
5) N.B. The angle of incidence of the machine can be adjusted from 0° to maximum
of 5° as shown in the picture.
−
6) Once the required angle of incidence is reached the operator will have to fasten
the positioning nut while keeping in position the central screw as shown in the pictu-
re.
−
7) Screw back the locking nut making sure it is properly fastened by acting simulta-
neously on the threaded rod as well with two wrenches as shown in the picture.
6
7
4
5
