10
ELECTRONIC GRINDER G300
Original Insgtructions
-
Rev. 00
-
.2018—In compliance with § 1.7.4 of the Machine Directive 2006/42/CE
G.B.C. Industrial Tools S.p.A.
Via Sandro Pertini 41/46 – 25046 Cazzago S.Martino (BS) – Italia – Tel. + 39 030 7451154 – Info: [email protected]
NOTE:
G.B.C. Industrial Tools S.p.A. declares that every machine is tested on steels commonly used in mechani-
cal and metal work fabrication with 30mm wall thickness. The figures listed in the above chart are de-
tected by a phonometer certified by an acoustic calibrator model DELTA HOM HD 9102 certificato
LAT (former SIT) N. SIT 03229/09 and we confirm the figures recorder are in compliance with the re-
gulation EN 60745.
Therefore following the evaluation of the environmental risks on the workplace, regulated by the law
decree 81/08 and following modifications, in compliance with the directive 2003/10/CE, and of the art.190
of such law decree, the personnel authorized to operate the G300 must be trained and educated in re-
gards to the above directive and must be equipped with the personal protective equipment (PPE) and
acoustic detection system on request of the operator himself or if deemed necessary by the medical staff.
MEASURES
