6
ELECTRONIC GRINDER G300
Original Insgtructions
-
Rev. 00
-
.2018—In compliance with § 1.7.4 of the Machine Directive 2006/42/CE
G.B.C. Industrial Tools S.p.A.
Via Sandro Pertini 41/46 – 25046 Cazzago S.Martino (BS) – Italia – Tel. + 39 030 7451154 – Info: [email protected]
The authorized operator in any case will not have to disregard the basic safety rules such as:
Using gloves and goggles (safety gear supplied by the company responsible for the site or
for the building)
To properly illuminate the working area
Ensure you are operating in an area which grants free movements (at least 1,5 metres around
the operator)
Do not replace the control system and do not replace parts with non original spare parts, and
do not project violent water squirts on the machine
Keep the hands away from hot and sharpened parts.
G.B.C. Industrial Tools S.p.A. remarks that for any non specified circumstances it is neces-
sary to obtain the authorization of the manufacturer.
G.B.C. Industrial Tools S.p.A. designs and assembles its machines in strict compliance with the
safety regulations provided by the applicable EC directives and by the Italian laws regulat
-
ing
this matter.
G.B.C. Industrial Tools S.p.A. declines any responsibility for misuse of its machines and their
use when in contrast with the regulation listed hereinafter and with the use and maintenance in-
structions hereto.
•
Carefully read ALL the following regulations and the instructions herewith attached before
starting any operation.
•
Carefully ensure that the operator and the foreman using the machine are fully aware of all
the regulations and all the instructions and that they are qualified to operate the unit.
•
Strictly attain to the indications given by the international symbols applies on the ma
-
chine
and/or on its case.
•
Do not perform any maintenance operation when the machine is plugged to the power sup-
ply.
•
Before every use, ensure the power supply connections to be conform to the specs given by
our manual.
SAFETY PRESCRIPTIONS
