FW Murphy Centurion C5 M-VIEW MV-5-C, Руководство по эксплуатации

Страница: 20 / 52

Section 50 00-02-1031
2019-08-07 - 14 -
Operational Screens
User-Configurable Screens
The Centurion has (9) user-configurable pages of (4) types. The Centurion Configuration Tool software allows
users to configure up to nine (9) screens with controller input signal groupings. Possible custom screen types may
include:
a) Custom Line by Line allows user to display process data in a list format with description and value.
b) Custom Gage allows user to display four (4) most important pieces of data on a 2 x 2 table in larger font.
c) Custom Control Loop allows user to display Control Loop functions. The control output will be displayed
as a percentage of the range.
d) Custom Generic Register allows user to display up to 20 items on a page that can be mapped to the
Centurion Modbus map and given a label.
For more information on configuring the optional screens through the Centurion Configuration Tool, please refer
to the Configuration Tool Quick Start Guide.
Map of Operational Screens
From the Home Screen / Landing Page, use the left and right arrows to view the Operating Screens. A password
is not required to view these screens.
Some screens are application specific and may not be used.
* When Configured
Logo
Screen
Configuration
Screen
Firmware
Bootloader
Digital input /
Output Status
Temperature
Input Status
Shutdown
History
Shutdown
Snapshot
Event
History
Active
Alarms
Home Screen /
Landing Page
Line-By-
Line
Control
Loop
Rod
Load *
NOTE:
Based on configuration, up to 9 custom screens here.
FW Murphy Logo Screen
The FW Murphy logo is the first screen in the sequence
of display screens and can be viewed by holding down
the left arrow until scrolling left ceases.