FUXTEC FK-KS126, Оригинальное руководство пользователя

Страница: 19 / 38

Original Operating Manual Tree Care Saw FX-KS126_rev03
19
ATTENTION
Before starting work, first read the section
"
Safety instructions
". For practice purposes,
it is recommended that you first saw through
pieces of wood that are easy to cut.
This also helps you to become familiar with the
operation of the chainsaw.
Always observe these safety regulations. The
chainsaw may only be used for cutting wood. It
is prohibited to cut other materials. The vibration
and kickback are different for different materials
and the safety characteristics are not be
guaranteed.
Do not use the chainsaw as a lever to lift, move
or split objects.
Do not stand over fixed uprights when sawing.
It is prohibited to connect to the chainsaw's top
shaft to any other parts than those specified by
the manufacturer.
It is not necessary to push the chainsaw into the
interface. Run the engine at full throttle and
apply only light pressure to the saw when
starting.
If the saw-chain is jammed in the interface, do
not try to pull the chain bar out by force, but use
a wedge or a bar to pry up the interface.