WC ORION III ENGLISH CDN 1230 REV01.DOCX
35
ORION III
3. Berner Attendant Wheel Lock
a. To adjust, loosen the screws (A) but do not attempt to remove the screws.
b. Slide the assembly (in the activated position) towards the rear wheel tire
until the brake shoe (B) embeds into the tire preventing the wheel from
turning.
c.
Tighten screws.
d. To activate wheel locks simultaneously, press down on the foot pedal (C)
until the brake shoe engages the tire and locks in place.
e. To deactivate the wheel locks, place toe of shoe under the foot pedal (C)
and pull up until the brake shoe disengages from the tire. When
deactivated the foot pedal will be in the up position.
f.
To adjust the cable, turn the adjustment screws (D) as necessary to ensure
that the wheel locks can get to their fully extended position when the pedal
is engaged. Position of the remote lock assembly may need to be fine tuned
to optimize the force needed to engage the pedal, depending on tire type. If
excessive force is needed to engage the pedal, cable life may be reduced.
Once proper adjustment is attained, lock cable adjustment screw in position
by tightening jam nuts against mounting block.
21
22
Содержание Orion III
